8919 New Falls Rd,

Levittown, PA 19054

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

8919 New Falls Rd,

Levittown, PA 19054

Commercial Pipe Lining & Bursting Services

Local Plumber-Commercial Pipe Lining & Bursting

Our Services

Superior Commercial Plumbing Services is Our Promise

Reputable & Experienced Services to take care of your Commercial issues promptly and thoroughly so it does not impact your business.

Pipe Lining System Capabilities:

  • Drainage and sewer line pipelines of all types (consisting of galvanized steel, cast/black iron, copper, and lead pipelines).

  • Insertion of part or whole areas.

  • Spot repairs of joints and other structural problems.

  • Repair all typical pipeline materials.

  • Sizes from 3 ″ to 10 ″.

  • Bends up to 90 degrees.

  • Blind ends.

  • Lengths up to 300 FT.

Proudly Serving All Bucks County, Pennsylvania

Stonybrook, Pinewood, Greenbrook, Holly Hill, Tullytown, Wood, Indian Creek, Fairless Hills, Penn Valley, Blue Ridge

Retails Stores and Chains

Shopping Centers / Malls

Realty Management

Office Buildings

Hospitality / Hotels

Industrial / Factories

Schools / Colleges


Hospitals / Assisted Living



What Is Pipe Lining?

Some jobs are better left to the pros...

Get No-Commitment Estimates For Your Project in Bucks County, Pennsylvania

Pipe-lining is a no-dig alternative for changing or fixing damaged, broken, leaking, or clogged up pipelines. Above all, it is necessary to handle this, especially with your business sewage system lines.


Since it is a “no-dig” method, costly excavation and demolition are no longer needed. As a result, pipe-lining is less costly than standard re-piping methods such as excavations or open trench methods.


Envision a smooth new PVC pipe put within the original damaged pipe to best describe pipe-lining. The gap in between the new and old pipelines is closed with an epoxy waterproof seal. As a result, despite the reduction of inner diameter, tests can show an enhancement in original flow capability.

How do I realize I need pipelining?

The damages are most likely already underway if you own or deal with a commercial property that is more than ten years old.


You will most likely see or experience the following pipeline rust signs:


  • Water with discolouration
  • Stains on sinks
  • Leaks or odors
  • Poor water flow
  • Continuous sewage backups

What types of pipes can be lined?

Lining can be done on commercial sewage system drainage pipelines from the building to the mainline. Roof drainage pipes, collectors, and business floor drainage pipes can also be treated lining.

What are the benefits of pipe-lining?

Don’t dig … rehabilitate! Excavations can be very costly in terms of work force, time, materials, permit costs, and damage expenses.


Pipe-lining does not interfere with a business day-to-day activities. It will not lose any earnings because of noisy digging equipment or even the need to section off risky working areas. Plus, drainage activities will only be stopped for a short amount of time during the job.

Is sewage system pipe lining effective?

Lining sewage system pipes can conserve up to 75% of the cost of changing an old pipeline with a new one for commercial facilities.


The labor cost lowers considering that fewer hours are needed to perform the trench-less treatment. It is simply the best value among all repair alternatives available.

How much does it cost to reline a pipe?

The cost of relining a broken sewage system pipeline ranges from $80-250 per foot, with an average cost of roughly $160 per foot. Whereas, repair costs for normal sewage system pipes might vary from $4,000 to $20,000, depending on the circumstance.

What triggers pipe problems?

Tree Root Seepage: Tree roots can typically get in and pierce drainage systems through connections, splits, and pipelines. As a result, obstructions and water loss will begin to happen.


Water: Gradually, water can break down, rust, deteriorate, and establish pinhole leakages in the system. Likewise, “hard water” having minerals can trigger pipes to get encrusted and blocked, resulting in clogs.


Additionally, pipe wall surfaces will collect water and “soft water” that may have acidic minerals, can easily dissolve and thin out the pipe walls.


Plumbing Products: Without a doubt, metal piping systems made from copper or other galvanized metals present major issues with time. Problems might happen in as little as 6 years.


Most copper and galvanized pipelines on average will start to rust after 10 years. So, pipe-lining is the best long-lasting solution to pipe corrosion.

What are the indications of a broken sewage system pipe?

Here are the 10 most typical indications of a broken sewage system pipe:


  • Sewage Backups and Clogs
  • Sewer Gas Odor
  • Mold Issue
  • Slow Drain
  • Additional Green and Lush Patches in Turf
  • Indentation In Lawn or Under Pavers
  • Structure Cracks, Settlement, and Sinkholes
  • Bug Problem
  • Rodent Issues
  • Pooling Septic Waste

Is a sewage leakage harmful?

The most common  risk posed by a sewage leakage are gases. Sewage can produce a wide variety of gases, consisting of carbon dioxide, methane, chlorine, nitrous oxide, hydrogen sulfide, and sulfur dioxide.


In high dosages, hydrogen sulfide is harmful and can trigger queasiness, confusion, and even death.


If you believe or not certain that you may have a problem, call a professional plumber immediately.

the best solutions

Residential & Commercial Plumbing

24/7 Emergency Service

The Pipe Lining Process

Local Plumber-Commercial Pipe Lining Diagram

PREPARATION: To attain the best results, the current pipeline needs to be well prepared. This consists of inspecting the pipe with a premium camera, cleaning the pipe, and finally measuring its diameter and length.


Large-scale repairs might need the disruption of water flow|streams through existing pipes in order to prepare the pipeline for lining.


INSTALLATION (INVERSION): Installing a pipe liner includes inserting the liner through drain clean-outs or minor openings. When it comes to partly broken drain areas, we just simply restore the damaged portion of the pipe’s opening.


The materials utilized for the liner are chosen based upon the condition of the pipe. Whereas, straight pipes use basic liner tubes, while pipelines with sharp bends, angles, and shifts require more versatile tubes.

USING THE EPOXY: The epoxy is what holds the liner to the pipe wall. This bond forms an extremely tight fit, preventing water from entering or exiting the pipe. After relining the pipeline using a pipe liner system, any internal corrosion or disintegration stops instantly. A lined pipeline can no longer be permeated by roots.  As soon as a pipe is lined, it will be without root invasions for the rest of its life.


TREATING PROCESS: The epoxy and liner cure in 4 to 12 hours. After the pipes have actually been recovered, service is restored.

What Is Pipe Bursting?

Pipeline bursting is a technique for changing underground pipelines such as a sewage system or water pipes without using digging devices or open trench methods. Except for new building, the majority of initial U.S. sewer drains and water lines have actually reached the end of their effective life and need to be upgraded or reconstructed. For decades, streets, walkways, landscaping, and even buildings have actually been built on top of these enduring underground pipelines. The interruption caused by open trench building can be considerable.


Layers of cement, asphalt, and landscaping need to be excavated and extracted in order to expose the pipe and finally replace it.

Local Plumber-Commercial Pipe Bursting Diagram

The pipeline bursting technique utilizes a conical bursting head that is somewhat larger at its base than the diameter of the existing damaged pipeline.


The bursting head is then connected to the replacement pipeline and fed into the shattered pipeline through an entryway hole.


The broken pipe will begin to break apart as the replacement pipe goes through the existing pipeline, thanks to the conical bursting head.


The pipe bursting specialist will then use a pull rod or hydraulic force to shatter the existing pipe and pull it out of its current area.


It quickly fills the bursting head’s hollow due to the fact that the new pipe is connected to the bursting head. You now have a new pipe!

What are some benefits of pipe bursting?

Pipeline bursting is the just trenchless method of replacement that makes it possible for the initial pipe to be refitted. It might also enable you conserve cash in the long run!

Nevertheless, there are several other reasons to think about pipeline bursting:


  • Very little landscape damage– Since it just requires 2 openings, you will not need to worry about your yard being turned up by excavation machinery.
  • Very little downtime– There is no need to close or limit areas, resulting in little downtime! It just takes a couple of hours to complete the procedure.
  • lower labor expenses– Pipeline bursting requires fewer hours and less labor to complete.
  • Less interruption There is no need for huge, noisy equipment to do the task!
  • Pipeline longevity You can replace the current pipe with a more robust pipe to prevent needing to duplicate the procedure in a couple of months or years.
  • {Increased pipeline flow You might see an increase in your wastewater flow if you use the trench-less sewage system technique.

Is pipe bursting safe?

Pipeline bursting is presently among the most safe and most affordable plumbing repair methods available.

What type of pipe is utilized for pipe bursting?

The most frequently utilized replacement pipelines for pipe bursting applications have actually been high- and medium-density polyethylene (HDPE and MDPE).


The crucial benefits of PE pipe are its durability, resilience, sturdiness, toughness, longevity, flexibility, and its versatility.

How long has pipe bursting been around?

Pipeline bursting was created in the late 1970s in the UK by D. J. Ryan & Sons in partnership with British Gas for changing small-diameter, 3- and 4-inch cast iron gas mains.


This method was patented in the UK in 1981 and later by the United States in 1986; both patents ended in April 2005.

Is pipe bursting good?

When compared to regular sewage system repair, pipeline bursting is among the cleanest sewage system alternatives available. Since it gets rid of the need to dig up any road or landscaping, Pipeline bursting has the least impact on the surrounding environment.


This also stops potentially deadly poisons from entering your system.

Some jobs are better left to the pros...

Get No-Commitment Estimates For Your Project in Bucks County, Pennsylvania

Proud to Install, Repair, and Service the Following Brands: