8919 New Falls Rd,

Levittown, PA 19054

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

8919 New Falls Rd,

Levittown, PA 19054

Toilet Repair Near Me

Our Toilet Repair Services Key Benefits

  • Locally Owned and Operated

  • High-Quality Workmanship

  • Bonded and Insured

  • Courteous Customer Services

  • Flat Rates with Upfront Estimates

  • Licensed Plumbing Professionals

Local Plumber - Toilet Repairs & Service

Plumbing is what we do

Toilet Repair Services Near Levittown, Pennsylvania

When things go wrong with your home toilet, it could be among the most typical– and troubling– plumbing problems you may experience in your home. Whether it is overflowing or running continuously, a toilet repair is an problem you can not put aside.


It would be best if you always try and maintain them in good working order as they are among the most significant fixtures in a plumbing system. We do not pay them much attention till something goes wrong and they quit working.


The feared clogged-up toilet is among homeowners’ most typical domestic challenges. Many will try to fix the issue, only to find that the fix did not work or that the issue reappeared.


When the issue requires more than just a plunger service, it’s best to call a local plumber near me for all toilet repair or installation needs. With years of experience servicing Bucks County, Pennsylvania locations, our local plumbing expert team can take care of toilet repair quickly and effectively, and at a reasonable cost.


Call us today and schedule a non-commitment appointment.

Some jobs are better left to the pros...

Get No-Commitment Estimates For Your Project in Bucks County, Pennsylvania

Most Common Issues with Toilets in Homes

Plenty of toilet repairs, installations, and services are best left for the pros to deal with. However, not all services require emergency plumbing services.


Allow us to go through a few of the typical issues encountered by consumers who have called us for suggestions on how to deal with them:

Moaning sounds:

If you hear groaning noises from a toilet, it could be due to a rise in water pressure, which makes a valve shudder or shake.


Random or constant flushing:

Either of these 2 issues will possibly cause the unit to flush and start filling up on its own:


  1.  the refill tube is too long, or
  2.  a leaking flapper


This flushing at random leads to water damage and waste, resulting in a higher monthly water service bill.


Compound flushing:

Perhaps you only flush once; however, the toilet flushes twice or even 3 times. A high water level is usually the source of this issue. Changing the float control within the tank will usually fix this issue.


Water dripping into the bowl, or “Phantom Flushes”:

A slow leak from the tank into the bowl is the source of the issue here. A malfunctioning flapper or flapper seat is unquestionably to blame.


Replacing a worn or broken flapper is the best solution to avoid plumbing issues. Empty the water tank, clean and check the seat, then replace the flapper.

Slow flushes:

A low water level or the lift chain that connects the flush handle and the flapper valve causes a toilet only to flush partially. Loosen the lift chain to let the flapper settle correctly inside the bowl.


Base leaks:

The gasket made of wax between the drain pipe at the base of the unit must be replaced if it leaks when flushed. This procedure requires an expert plumbing service.


Not flushing completely:

  • Check if the lift chain has any slack, and make adjustments as needed.
  • Check for an appropriate water level in the tank.
  • After that, ensure that the flapper is fitted correctly and is the best size and style for the unit.


The Bowl Empties Slow:

Blocked openings under the bowl’s surface area are the most typical cause of a slow-emptying bowl, also referred to as a poor flush. To clean out any clutter, gently jab each flush opening with a bent piece of wire.


If you are still unable to resolve these issues, it will be best to contact a local plumber near me.


the best solutions

Toilet Repair Services

24/7 Emergency Plumbing Service

Pro Plumbing Service Tips for Repairing Common Toilet Problem Yourself

A toilet consists of 2 major parts: the bowl unit, which rests on the flooring, and the top tank which holds the water. The bowl is a solid drain piece of the fixture made from porcelain with no moving parts.


Few repairs involve the bowl, with a few exceptions. On the other hand, the tank is where 2 essential valves exist and the handle for flushing. The tank is where much of the toilet repairs occur.


You will be surprised to learn that most problems are relatively easy to fix without the need to call an emergency plumber.

Running Toilet Repair Service:

If you’ve tried out a brand-new flapper for a running toilet and it still runs, do not give up hope. Here’s a solution that ensures it works.


Few home nuisances are somewhat as irritating as the noise of continuously running water. If you hear filling up frequently, or if you hear the constant hiss of running water, the flapper in the unit could be leaking.


The flapper (also known as the “flush valve seal”) is the plug that falls against the drain opening (flush valve drain seat) on the bottom of the tank. It holds water till the next time you flush. When flappers or flush valve seats wear, water leaks out, making the valve to open and refill the tank.

Replace the Flapper-toilet repair

Step 1: Changing Flapper:

First, remove the old flapper and bring it with you to the hardware store or home center to find a similar one.


Note: Occasionally, a brand-new flapper does not fix the issue. If you have tried changing the flapper, but it still runs, the flush valve seat is probably rough or pitted.


You can change the complete flush flapper valve; nonetheless, it is not an easy job, and it may require the experience of a plumber near Levittown, Pennsylvania.

Step 2: Flapper Kit with Flush Seat Repairing:

If changing the flapper alone didn’t work, search for a flapper kit with a flush seat repair.


Note: You want to buy a Flush valve repair kit. The kit has a flapper and matching seat that you adhere to the broken seat with the glue provided.


  • First, close the water supply to the toilet.
  • Hold the flapper open while flushing to enable the remaining water to drain from the tank.
  • Use a sponge to remove the water that remains entirely.
  • Follow the included directions to set up the brand-new flapper valve seat. 
    • Pro tip: If the unit uses 3.5 gallons or less of water per flush, you will need a set that includes a plastic cup to change the flapper’s time to stay open. If your unit uses more than this, get rid of the timing cup.
      Set up the brand-new flapper.
  • With the flapper down, readjust the chain length, so it’s somewhat relaxed.
  • Turn on the water to check the flush.


Note: You may need to fiddle with the chain length-size to get the flapper working correctly.


When finished, cut off the excess chain to prevent it from getting stuck under the flapper.

Toilet Repair Services: Broken Handle

If shaking the handle does not stop your toilet from running, any one of these straightforward repairs probably will.


The handle is a primary device– just a few things can malfunction and need to be repaired. The solution is much easier than you think.


Step 1: Loose Handle:

If the handle is loose, the installation of a new one is fairly easy. Tighten up the nut and washer inside the tank with a pair of pliers without over-tighten it; you could strip the threads or, even worse, damage the porcelain tank.


If the handle sticks in the down flush position, it may not be mounted correctly. Loosen up the nut washer, reposition the handle to align with the top side of the tank, and re-tighten the nut.


Step 2: Stripped Threads:

If the nut does not tighten up or keeps coming loose, it’s a sign that the nut threads are stripped. For a quick fix, cover the threads on the handle screw with “plumber’s tape” or electrical tape.


Then, slide the washer and nut back on and tighten up the nut. It is often best to replace the handle with a new one if the threads are too damaged or broken.


Step 3: Handle Arm:

  • Check out the handle arm for issues, splits, or breaks.
  • If there are issues, change the entire handle and the arm assembly.
    • Pro tip: Remember where your handle mounts on the tank before buying a replacement handle. There are numerous kinds: front mount left, front mount right, front mount universal, and side mount.

Step 4: The Chain:

Suppose the handle appears to be running correctly, yet the toilet still does not flush. In that case, the chain attaching the handle arm to the flapper could be detached or damaged.

    • Pro Tip: Before working on the chain, empty the tank, shut off the water valve, and pull up the flapper, allowing the water to drain.
  • If the chain detaches from the handle arm, reconnect the chain from the flapper into the holes on the handle arm, using the chain hook.
  • Leave a little slack in the chain.
  • If the chain detaches from the flapper, reconnect the chain to the flapper.
  • If the chain or the flapper is defective, change it.

Purchasing Tips for Toilets

Sick of your old, dripping, water hog of a toilet and want to get a brand-new one? A toilet replacement is not a major job and today you’ll find water-efficient units with a variety of options. Use the following ideas for the next time you go shopping for a new unit.

Insulated tank-toilet-installation

Insulated tank:

If summer times are damp where you live, and you do not have air conditioning, you’ve probably spotted “sweating moisture” quite a bit on the side of the unit. Condensation forming on the outside of a toilet can drip down, making a water mess and even rotting your flooring.


Today, most toilets are made available with insulated tanks to prevent condensation issues. Look into this alternative if you have “sweating” problems.

Bowl height-toilet-installation

Bowl height:

Bowl height is the distance from the flooring to the top of the bowl’s rim– the typical height is 14 to 15 inches. Yet today, you’ll find units 16 to 18 inches high, often called “comfort level” “ADA height” or something similar.


The added heights available make getting on and off much more accessible and comfortable for many people, especially aging people. Designs for kids with heights of 10 to 14 inches are also available.

One-piece vs. two-piece-toilet-installation

One-piece vs. two-piece:

A two-piece (a separate tank and bowl) is the most common style in homes. Yet one-piece designs are offered. Two-piece designs are generally less expensive; one-piece designs often have shorter storage tanks and are much easier to clean up.


One-piece designs are the choice of many property owners because of their smooth, streamlined look.



When it pertains to toilets, expensive does not immediately suggest better efficiency. Many of the best models we have tested were relatively cost-effective and performed well. In comparison, more expensive ones were only marginally efficient.


Fashion is fickle. Stick to a white or beige color style to avoid being stuck to a color you’ll dislike a few years later on.

Flush-handle location-toilet-installation

Flush-handle location:

If you have a large bathroom and have ample room above or beside your toilet, this probably isn’t all that crucial. Be sure to choose a style with a top handle or one opposite the wall if the room is limited.


Buying a suitable style is very important, to spare yourself a return trip to the store, so pay attention when choosing style options.



The “rough-in” measurement is the distance between the flange screws that anchors the toilet bowl to the flooring and the wall surface behind it. A 12-inch “rough-in” is the most common measurement; nevertheless, in some older properties, you could have a ten-inch or even a 14-inch “rough-in.”


  • Tip: Make sure to measure your “rough-in” and always account for the thickness of your baseboard, paneling, or tile backing before purchasing the unit.

Bowl design:

Many unit designs marketed today have either round-front bowls or elongated-front bowls.


  • Round-front bowls are great if the area is tight.
  • Elongated bowls have a more extended rim– as much as 2-inch longer– and require more room.


On the plus side, elongated bowls are usually much more comfortable for adult use which helps boost health and wellness. Assess your supplier’s websites for bowl measurements, and measure your space before picking the bowl design.



If you mount a brand-new toilet with a smaller sized tank, you may need to paint the part of the wall surface area covered by the old tank.


The same will apply if the old unit style had a large footprint on the floor, you might need to patch and repair the flooring part surrounded by the footprint of the old unit. You may additionally need to change the entire flooring before setting up a brand-new unit.

Some jobs are better left to the pros...

Get No-Commitment Estimates For Your Project in Bucks County, Pennsylvania

Proud to Install, Repair, and Service the Following Brands: